Powder Coated in any colour
Full System Compression Joint
Trueline’s Full System Compression Joint is ideally suited for insulated systems. Both the top and base sections are manufactured from aluminium and adjacent sections are joined together with a joint clip. With the full system compression joint the top and bottom section are fixed back to the wall. Again this compression joint can be supplied with fully welded corners and end caps ensuring no breaks within the system. The gap has an EPDM foam strip applied to the lower section to ensure that water cannot be driven back into the system. The upper section is supplied mill finish but the lower section can be powder coated to a colour of your choice. This system allows for a number of render thicknesses and this must be specified when ordering. The top and base sections are supplied together as a set.
Full Systems are available for 6, 10 & 15 Render
Code | Description |
---|---|
FC506N | Two part 50mm full system compression joint |
FC606N | Two part 60mm full system compression joint |
FC706N | Two part 70mm full system compression joint |
FC806N | Two part 80mm full system compression joint |
FC906N | Two part 90mm full system compression joint |
FC1006N | Two part 100mm full system compression joint |
FC1106N | Two part 110mm full system compression joint |
FC1206N | Two part 120mm full system compression joint |
FC1306N | Two part 130mm full system compression joint |
FC1406N | Two part 140mm full system compression joint |
FC1506N | Two part 150mm full system compression joint |
FC1606N | Two part 160mm full system compression joint |
FC1706N | Two part 170mm full system compression joint |
FC1806N | Two part 180mm full system compression joint |
FC1906N | Two part 190mm full system compression joint |
FC2006N | Two part 200mm full system compression joint |
FCJOINT | Joint Piece |
FCINTCORN | Two Piece Pre Formed Welded Internal Corner |
FCEXTCORN | Two Piece Pre Formed Welded External Corner |